Svanfon MiniMechTools Models
Region: US
Tuesday 26 November 2024 03:25:51 GMT
178963
2390
32
59
Music
Download
Comments
tkwong877 :
🥰🥰🥰
2024-12-13 16:30:00
1
iPocik :
Use a hook Remove gloves Check the cutter height Make a chip breaker Clamp the rear chuck as tightly as possible and minimize the spindle overhang Reduce speed Use coolant/oleic acid
2024-12-18 09:10:43
2
Manuel Gonzales260 :
Guy pulling chips by hand (gloves)!
2024-11-26 03:54:41
32
Samuel :
bro fiddled with the chip for at least half an hour
2024-11-26 22:10:36
3
Scrapyard Dog :
Just increase the feed rate...........
2024-11-26 06:32:59
3
Lars [Team MikeBo] :
use carbide insert with chip breaker
2024-11-26 20:54:28
2
Positive Manny :
safety First avoid using gloves
2024-11-26 13:50:22
2
Ed D :
Maybe use a different insert!!!!
2024-11-26 04:41:52
2
jarekmacherski :
i na huj takie obroty o połowe na dół
2024-11-26 06:06:14
1
is ishfaq 884 :
🥰🥰🥰
2024-11-29 14:54:23
0
A :
Bien, avec les mains 👍👍👍
2024-11-28 16:23:26
0
Richifú :
very bad
2024-11-28 01:10:58
0
47kingKong :
Spännehacken wie wär’s
2024-11-27 18:50:46
0
Yuddi :
too fast caused roughed thread n not effective, depth of cut caused every single threading process should break the chip by stopping threading process rather than proper depth of cut with proportional speed will finish right on time after 3 to 4 times threading process
2024-11-27 16:41:17
0
Andrew Ellis22 :
Use a swarf rake! Pillock!
2024-11-26 18:15:44
0
ratadappat :
need an insert with a chipbreaker
2024-11-26 17:56:30
0
Haji Saleem 🇵🇰 :
very nice
2024-11-26 17:28:19
0
Tây Thi :
xẻ cho con dao một đường thoát nhỏ ở góc cắt chính.
2024-11-26 13:51:20
0
⚖️ JUSTICIA PARA AITOR ⚖️ :
cojer virutas con la mano,,,NINGUNA,, Cortés y heridas seguras ,,con un gancho de hierro si,
2024-11-26 10:30:19
0
ជាងគួក ធ្វើសោនិងក្រឡឹង :
🥰🥰🥰
2024-11-26 09:43:59
0
CleverTrevor.73 :
pliers
2024-11-26 09:17:08
0
오미가미 :
칩 브레이크 기능이 없군요 ㅡ공구에가능
2024-11-26 06:30:55
0
alanl995 :
Maybe cut them with snips?
2024-11-26 04:11:11
0
Aliazmat Meharazmat :
🥰🥰🥰
2024-11-26 03:36:20
0
To see more videos from user @svanfon, please go to the Tikwm
homepage.
