world_of_motors
Region: US
Sunday 26 January 2025 20:16:33 GMT
181891
2792
513
45
Music
Download
Comments
JohnThomas :
Timing is wrong
2025-01-27 15:32:04
862
Josh Ammons396 :
if this is a serious question you need to close that up and walk away
2025-01-27 21:07:54
388
BN.TV :
Spark plug is in
2025-11-30 02:41:46
0
Jazon fue :
Aline the two little dots Toft and that’s gonna fix it
2025-10-13 19:07:46
0
XR WIPPAAAA :
Timing is definitely not right
2025-01-27 12:22:44
5
Keilen Koch :
valves are probably too tight
2025-01-27 01:13:58
83
🗣️ :
carburetor jets are clogged
2025-02-05 02:28:24
2
Alex :
because you then have to time it and the cam opens the exhaust or intake valve
2025-01-26 20:58:02
301
Kaden Ragin :
If u using the stock cam it’s gonna do that
2025-01-26 20:27:01
0
Matthewj :
There is compression without the cam because the valve are staying closed all the time. And when you out the cam in you need to adjust your valve lash that's why you have no compression after
2025-02-15 19:16:37
0
️ :
You’ve got your valve lash set way too tight on your rockers
2025-01-26 22:49:42
0
Will :
Valves too tight, timing is off, those motors may have a compression release
2025-01-27 14:21:38
0
Owen :
There is a compression realese on the cam it’s normal
2025-01-26 22:16:14
49
Mr Bike Man😎 :
Compression release system on the camshaft allows easy startups
2025-01-28 09:39:46
0
nolanmiller16 :
put the wrenches down and step away
2025-01-28 00:22:13
55
Shea :
compression release on cam for startup, make sure it's timed right, compression release should click off when running.
2025-01-28 16:17:31
0
. :
You probably fixed it but you probably have the spark plug in and compressing it while all valves are closed also
2025-10-08 03:28:51
1
Faultymagnum :
This compression without the cam because the valves are closed and when you put in the cam either the valve release is very good or your timing is off
2025-09-14 03:19:33
0
c :
adjust your rocker arms, that should fix it
2025-10-20 21:59:00
0
That.04.gt :
When you don’t have the cam in there both the intake and the exhaust valves are closed and whenever you put the cam in, it’s holding one of the other opened and if it’s not time right, it will cause
2025-01-27 00:26:19
0
720 racing :
valves are being held open. make sure dots on cam and crank are lined up. set valve lash to 0.003 intake 0.004 exhaust unless aftermarket cam states otherwise.
2025-01-28 13:22:17
0
travyb_6 :
bro its bc the cam opens a valve that pushes out the air 🤦♂️
2025-01-27 03:46:41
0
Jwig :
Timing off? cam holding valves open ?
2025-01-26 22:41:40
0
j0rdanbuilt :
Is your spark plug in?
2025-01-26 20:20:25
2
𝔦𝔞𝔫 𝔥𝔬𝔴𝔢𝔰 :
What are these people talking about😭 if there’s no cam that means there can’t be “wrong timing”. The valves are held closed with the valve spring and retainer.(hope this helps)👍
2025-01-28 05:35:54
0
To see more videos from user @world_of_motors, please go to the Tikwm
homepage.
