Mark DeCola
Region: US
Thursday 27 February 2025 19:37:28 GMT
193145
8839
457
52
Music
Download
Comments
Bryan Montgomery :
Temp gun or thermal camera will help you isolate the issue.
2025-06-27 12:17:54
0
angelojstewart :
Definitely got a bad glowplug. Very common on Kubota engines. When the engine is cold and cylinder with the bad glowplug is loading up with fuel until it warms up and starts firing on that cylinder
2025-02-27 23:22:12
139
Trevor Goodwin :
Check and clean ccv system
2025-03-24 02:48:05
0
Jeff Newton496 :
bad glow plug, miss till warms up
2025-03-01 04:17:27
16
Nathan Mills :
Just run it till sounds expensive
2025-02-28 00:17:25
238
Austin :
Need to run a test on the injectors with the computer
2025-02-27 19:47:59
51
v8mack500 :
sounds like it wants to be a cummins
2025-02-27 19:53:54
125
user1773068799658 :
trade in get a deere ..problem solved
2025-02-28 00:06:01
0
Phebaweeb :
It’s just not quite firing on all cylinders when it’s cold when it warms up, it starts firing on all cylinders. Lots of equipment does it?
2025-03-09 20:07:24
0
Dylan Miller :
Flow test ur injectors
2025-02-27 20:48:07
16
TiredMechanic :
Could be a few things. fire it up cold and use a IR thermometer to check temps at each exhaust port. see if one varys in temp, if so its the problem cylinder.
2025-03-01 00:15:20
0
caseyjewett :
You can either pull and have tested at 75ish each or cap one injector at a time and run it till it doesnt do it, def an injector though less work to just pull them. Might could borescope exhaust manif
2025-02-28 00:29:07
3
collin_379 :
Check the fuel lift pump on the rear right corner (passenger side) they have a little screen in there that’s gets all alge and debris in the screen. Clean it! Most overseen filter for sure
2025-02-27 19:48:57
24
Jesse Gullet :
We have a TL 240 skid steer like that done that for years and a TB 285 excavator they white smoke if it’s not warm if you hear no noise & not burning oil run it it’s likely a injector run it
2025-02-28 02:21:56
0
Trevor Block :
is your glow plug light flashing
2025-02-27 20:55:18
2
Brennan Heuerman :
Scheid Diesel in IL and IN can test them but will be able to tell you if they hold pressure with no leakdown and flow within spec. Since you'll have to pull the valve cover you can also check valve lash since it does have adjustable valves and see if you've got one that is loose and tightening up as it warms up
2025-02-27 23:59:08
1
Seadoo boy🇨🇦🍁🇨🇦 :
They are known for their injectors to leak into the cylinder when they are cold but if you try using some brake cleaner when you go to start it up around the injectors if you can or put 2 fast sprays
2025-02-28 03:48:55
1
aidenbaker43 :
Check fuel pressure at start up and once warmed up. Look into getting injectors pulled and inspected go from there
2025-02-27 19:47:14
31
JR Mohr :
I have a TL130 (older model of the TL8) never had that issue but I run it no different than I do my cummins. Add a heavy dose hot shots diesel extreme and run it and see if it cleans up.
2025-02-28 12:56:35
0
ethanhammel :
Had to replace injectors on my Kabota 75svl at 1300hrs. Sent them off and got reman injectors and fixed the problem. Mine did not puff white smoke but sounded the same.
2025-02-28 03:22:51
8
dontaskme012 :
Quick and easy thing to try before you dig into anything too far would be to run some injector cleaner through for a tank, Cat and John Deere have good ones
2025-02-28 03:21:52
19
jeff paden :
If it Ain’t broke, don’t fix it
2025-02-28 10:34:47
1
Mark Baston995 :
Definitely needs an injector if your tryna get it diagnosed for cheap without a scan tool you can buy common rail caps to cap each injector from tamer x and just cap one at a time till it doesn't 1/2
2025-02-27 21:23:01
0
wesleysparks57 :
white smoke not fuel. any diesel engine that burns unburnt fuel knows it's black. blue smoke like that usually means that a vale set is going bad.
2025-02-28 03:20:40
0
Lucas :
I’m your guy… your dropping injector pressure. Could be injection pump. Could be the tune your running since i see its weight reduced. But the issue is between the injection pump and the cylinder.
2025-02-27 23:28:12
0
To see more videos from user @mark_decola, please go to the Tikwm
homepage.
