Dark Iron Diesel
Region: CA
Thursday 20 March 2025 16:25:26 GMT
77074
6607
80
50
Music
Download
Comments
️ :
It wasn’t even a hammer either 😭 (it’s a mallet)
2025-03-20 16:38:25
168
Jayden :
If they aren’t at top dead center it’s fine I wouldn’t do it too dead center
2025-03-20 21:39:05
2
hp :
did a head gasket replacement on an old bulldozer in the woods some time ago unfortunately I forget my torquemeter at home and just did it by feel still runs. there's some people that don't get it that some things can be done more than one way
2025-06-09 20:03:44
0
Joshua Joseph :
What can I do to make my 2021 f350 faster? Already have done the tune an delete
2025-03-20 17:02:22
2
justacommonrail24v :
That is definitely the correct way
2025-03-20 18:51:12
98
Lucky :
You’re so washed bro
2025-03-20 16:44:21
18
bTerry :
lots of keyboard warriors out there unfortunately
2025-03-20 18:27:38
61
Nice_Bass2020 :
I do this on Toyota heads during replacement. Never had a problem and found one keeper that didn’t stay in. Glad I found it before firing it up.
2025-03-20 16:30:38
18
Dmaximpala67 :
yes sir. People are ignorant. Definitely tap them to make sure they are seated.
2025-03-20 21:29:51
36
jonathantheberge5 :
Bro keep doing what ur doing. Cant aknowledge every 15 year old kid with a tik tok account that has never even taken a valve cover off.
2025-03-21 00:33:59
5
travisschwarz539 :
Pro tip right there
2025-03-20 23:19:46
3
Jason :
It’s wild that you need a tool to compress the spring just to get them out and people think that’s going to cause damage 😂😂😂
2025-03-21 01:05:57
2
Austindood :
Even at tdc it wouldn’t hit hard enough to even nick the piston/valve. You’d have to hit it with a sledge to hurt anything.
2025-03-20 23:31:17
2
Bill Storey :
😂😂Google said it would!!
2025-03-30 22:38:52
1
whistlin.5.9 :
Side note man, i saw you have A YT video about the BD vgt kit for the 5.9’s made some years back. Howd you like it?
2025-03-21 00:57:46
1
Totalled 6.7 :
Love when you rant buddy love your videos keep it up
2025-03-21 02:53:28
1
ryley :
are they 60lbs valve springs ?
2025-04-19 21:23:04
0
Volvo Enthusiast Group :
I drive Volvo
2025-03-21 04:42:52
0
HAGEN :
literally just installed my own conical springs this morning. 100% correct way to make sure that the keepers and springs are seated correctly
2025-03-28 23:39:56
0
WestBuilds :
Not going to say it’s damaging anything or that you shouldn’t seat them but the valve definitely would hit the piston at tdc. The intake valve to piston clearance is roughly .04 in. And your smackin🤦♂️
2025-03-21 09:17:56
0
Val Gauvreau :
even if they are hitting the piston it's not gonna hurt anything.
2025-03-30 16:54:17
0
rule_breaker.11 :
lol just cooked haha
2025-03-21 21:47:03
0
Anthony :
even if it did hit the valve you're not gonna hit it hard enough to damage anything 💀
2025-03-23 02:44:10
0
Alberta Freeriders :
These keyboard warriors 😭
2025-03-20 18:08:19
2
Ardika comeau 🇨🇦 :
Keyboard warriors who watched 5 mins of a Chris fix video and call themselves a mechanic
2025-03-26 17:25:56
0
To see more videos from user @darkirondiesel, please go to the Tikwm
homepage.
