1. Home
  2. Detail

@ohmar.oh: #ငါမသိ ###ချစ်စရာလေးပါ

ချစ်စရာလေးပါ
ချစ်စရာလေးပါ
Open In TikTok:
Region: MM
Tuesday 22 July 2025 15:00:45 GMT
102
8
0
1

Music

Download

No Watermark .mp4 (4.62MB) No Watermark(HD) .mp4 (4.62MB) Watermark .mp4 (5.37MB) Music .mp3

Comments

There are no more comments for this video.
To see more videos from user @ohmar.oh, please go to the Tikwm homepage.

Other Videos

anywayssss @Dr Mark Ginsburg is the BEST injector 🫶🏼💅🏼 #botox #lipfiller #rhinoplasty
anywayssss @Dr Mark Ginsburg is the BEST injector 🫶🏼💅🏼 #botox #lipfiller #rhinoplasty
Replying to @🅽🅴🆈🅼🅰🆁 سرعة النت عندي في امريكا #امريكا#مصر#العراق#fyp
Replying to @🅽🅴🆈🅼🅰🆁 سرعة النت عندي في امريكا #امريكا#مصر#العراق#fyp
#🤗 #💖
#🤗 #💖
عـَلمودك📍#عدوني #ستوريات_انستا #explore #الشعب_الصيني_ماله_حل😂😂 #عباراتكم_الفخمه📿📌 #مشاهير_تيك_توك #تصاميم_فيديوهات🎵🎤🎬 #لايك__explore___
عـَلمودك📍#عدوني #ستوريات_انستا #explore #الشعب_الصيني_ماله_حل😂😂 #عباراتكم_الفخمه📿📌 #مشاهير_تيك_توك #تصاميم_فيديوهات🎵🎤🎬 #لايك__explore___


3D printed Great White Shark This dude really challenged my printer to the limit as it wouldn't stick to the print plate no matter what I did. Even brims and supports didn't work, it always failed at the same point. Maybe I should have slowed it down more. I guess this print would also be better suitable for coreXY printers because the moving print bed won't help the adhesion issues at all. I tried printing this three times and every one of them had issues. Luckily the prints were able to complete (they had some defects though) so I was able to put the parts together after some tinkering. Any suggestions what should have I done differently and has someone managed to print this with a bed slinger without issues? Printer: Bambu Lab A1 Filament: PLA Silk Rainbow STL file: STLFLIX #3dprinting #3d #satisfying #asmr #timelapse #shark #greatwhiteshark #jaws #babyshark #shorts #reels
3D printed Great White Shark This dude really challenged my printer to the limit as it wouldn't stick to the print plate no matter what I did. Even brims and supports didn't work, it always failed at the same point. Maybe I should have slowed it down more. I guess this print would also be better suitable for coreXY printers because the moving print bed won't help the adhesion issues at all. I tried printing this three times and every one of them had issues. Luckily the prints were able to complete (they had some defects though) so I was able to put the parts together after some tinkering. Any suggestions what should have I done differently and has someone managed to print this with a bed slinger without issues? Printer: Bambu Lab A1 Filament: PLA Silk Rainbow STL file: STLFLIX #3dprinting #3d #satisfying #asmr #timelapse #shark #greatwhiteshark #jaws #babyshark #shorts #reels

About

Legal