@celenakinsey: Follow along to see what we do next! Steps for the track- 1. Grab tracks of various lengths, and even loops if you want, and connectors. The hot wheel ones are not as strong so I recommend some on my LTK! 2. Find a start point for your track and map out half of your wall to start. We did this by having a person hold the track at one point and another holding the track at the end and driving down cars to make sure the track wouldn’t fail. 3. Once you have your first part working, place painters tape where the bottom of the track piece is on different sections so you have the right angle of your track. 4. Take your connectors and drill a hole in the middle of them, then take an L bracket (on my LTK) and drill a hole in the middle of it (it comes with holes but they’re too big). Once both of them have holes, take your connector and screw it to the top of your bracket. 5. Take that connector and add it to your track (slide it through the track dont use it to connect to another orange track piece because these tracks with the brackets are just for support) and drill that track section into the wall (using wall anchors) 6. Keep going for each section until you complete a wall (our one wall had 7 anchors and 5 long orange tracks, one loop system with an orange track, one shorter track and one curve piece) our other wall had 5 long pieces and 1 curved piece). The loops can be a little tricky to get right so if it stresses you just use long track pieces! #hotwheels #roomsetup #diyproject #boymomlife #hotwheelstrack

Celena Kinsey

Open In TikTok:

Region: US

Thursday 24 July 2025 01:57:50 GMT