Mark DeCola
Region: US
Sunday 14 September 2025 01:33:31 GMT
152288
13162
195
50
Music
Download
Comments
keith :
Add filters between the compressor, hose and gun. Also add a water trap. I like my H.F. guns.
2025-09-14 01:52:15
253
Brendan Jones :
Need an air dryer so you don’t get moisture in you air line
2025-09-14 01:53:22
113
hayes adkins :
Start buy spraying water till you can keep it from not running etc
2025-09-14 01:42:32
39
cjbizzlecjsrepairshop :
What happened to the shop you had?
2025-09-14 02:32:45
2
Amber Pelletier765 :
don't spray to close you will have runs
2025-09-14 06:52:39
0
Martin Smith :
You need to paint the compressor first
2025-09-14 02:04:01
35
EvilOne :
Spend more time on prep. Sand it, clean it, clean it again, degrease it, clean it again. Use a good primer. Lay it down in thin even coats. Let it dry (or tack up) before laying down next coat. Same with paint. Watch some videos on how to adjust the gun. 👌
2025-09-14 02:14:00
100
CoreyF722 :
use some cardboard to get some practice and get to know the adjustments of the sprayer
2025-09-14 02:19:28
0
DigBick :
Keep the spray moving don’t stop in one spot
2025-09-14 02:25:25
0
Joseph Recinos :
The white desiccant filter from harbor freight are nice especially on compressors that build up lots of moisture so get some to put on after the regulator. And like people have said prep is key. 50% overlap each pass to keep everything even and smooth
2025-09-14 06:35:49
0
Victor WilliamThongs :
spray pattern should be tight oval not frayed oval and distance should be two fist distance away. movement speed should be the speed of how you wipe a window.
2025-09-19 22:30:38
0
Bill Kells 🇨🇦🇨🇦 :
Buy good quality paint and talk to the paint rep about the proper mixer and air pressure, he can also recommend the correct nozzle size
2025-09-15 00:54:00
0
Kaedyn Holloway :
Stay away from wind and dust
2025-09-18 17:38:52
0
psygopher :
a few rolls of painters tape and blocking paper for masking, acetone for cleaning, various grades of sandpaper, sanding blocks off the top of my head
2025-09-14 03:33:09
0
𝓕𝓮𝓻𝓷𝓪𝓷𝓭𝓸𝓜𝓸𝓸𝓻𝓮06 :
I know it might be common sense but when ur spraying always make sure it’s clean cuz with some paints if it’s a bit dusty it’ll bubble up and become all furry. And another one is don’t have too much air coming out like have abit more paint coming out than air cuz it comes out bad if u have more air than paint
2025-09-14 09:47:33
0
Manraj Kalkat :
When you wanna stop you would rather keep spraying and stop it away from whatever you are painting than deal with drips.
2025-09-14 05:56:22
0
redmonster497 :
Read and follow the tech sheet for the paint you are using
2025-10-06 11:15:32
0
David Soler Cepeda :
cheers from Venezuela
2025-09-14 01:40:28
0
️Evan :
What ever happened to the place you use to film videos at working on trucks?
2025-09-14 07:34:46
8
Boom Penguin :
80% of it is sanding and masking
2025-09-19 13:23:11
0
edelkenany :
dude the 14$ harbor freight ones work very well, I buy them as a single use type of deal so I don't have to clean them after, and I paint cars with them. if you dial them right, make sure you have no moisture in the air they will give you a clean paint job. I did countless trucks with them.
2025-09-14 12:06:29
0
Thefatwa :
HF spray setup is totally worth it. Get drizzle n go
2025-09-14 08:09:05
0
Ben Draughn :
Color inside the lines
2025-09-15 04:55:12
0
Edward Smith :
drain the compressor tanks of water as well
2025-09-14 13:13:23
0
Jason Smith :
Get a swivel connector for your spray gun
2025-09-14 04:03:24
0
To see more videos from user @mark_decola, please go to the Tikwm
homepage.
