So you’re gonna polish it every couple weeks now? You can clear coat it and be done with it.
2025-10-15 15:22:30
190
Teodorico Morell :
Quick? Really?
2025-10-16 00:30:06
62
ᴀʟɪʏᴇᴠ :
😄
2025-10-16 16:35:05
22
irv :
Just skip the 1st 6
2025-10-16 01:34:55
8
Pedro Neyra 💙 SC ♊️ :
completamente innecesario debajo de 1000
Suficiente con 1000, 1500 y 2000, pulidor grueso y un pulidor 3 en 1 y listo ✅
2025-10-16 02:37:52
20
Mikuś_czarny225 :
po co skoro było git
2025-10-16 06:58:36
5
TGK:VAZ_21.. :
если так часто делать от стопаря ниче не останется:)
2025-10-16 11:35:14
86
Adrian salcedo :
Pregunta de una persona que no tiene idea, porque no va directamente con el disco que mas lija?
2025-10-16 11:54:34
1
M :
in Amazon spend 60mfor both new back lights. Just waist your time
2025-10-16 03:54:02
2
Mr E Pgh :
and with as thin as these plastic lenses are you just sanded off about 50% or more. too many grit changes. ive done it with 3 levels for some really bad lenses
2025-10-16 03:35:58
5
Sophia 💕 :
Great tip! My tail lights really needed this, definitely giving it a try.
2025-10-15 14:22:39
35
yunus3850catli :
Prend neuf c’est plus simple
2025-10-17 09:35:29
0
𝓦𝓪𝓱𝓪𝓫𝓰𝓽𝓱𝓮𝓰𝓻𝓮𝓪𝓽.® :
first
2025-10-15 14:21:17
1
matei :
Nu știu cît timp tine cu polish. Eu după grit de 3000 am polimerizat și au ieșit ca din fabrică așa sunt de 3 luni.....
2025-10-16 01:02:51
1
†fanat_arlecino† :
обсмалить проще было бы
2025-10-16 10:47:30
8
Rt07 :
audi a6
2025-10-16 07:11:17
1
maranoda :
That wasn’t quick lol
2025-10-17 01:28:29
0
khayalmukhtar :
What is the brand of the sandpaper?
2025-10-16 12:15:00
0
404 :
Will that makes the plastic cover thinner ?
2025-10-17 04:36:46
0
Kuki Patrull😎 :
800, 1200, 1500,Varnish and very good
2025-10-16 18:19:25
0
😶🌫️ :
perfect job men👌
2025-10-16 22:05:23
0
Cruz81 :
all that sanding and at the end just polish 😂😂😂😂😂 I think clear coating is the best ending for all that work
2025-10-16 16:36:42
0
That.One.GE8 :
From experience don’t start with low grit start with 800 grit and work your way up to 2k if available and then polish and clear coat